Parcel 95056 000 A 606

Cadastral parcel of 1,322 m² (recorded area), in Belloy-en-France. Planning document zoning: development zone (AUI).

Recorded area: 1,322 m²
Planning zone: AUIDevelopment zone (AUc)

The parcel (in colour) and its neighbours, from the cadastre; computed perimeter: 162 m. North is up; the bar gives the scale.

The cadastre is a tax record: it does not prove ownership. Why?

The cadastre is a tax record: it does not prove ownership and its boundaries have no legal force (only a surveyor's boundary marking does). Its plan is approximate: especially where it is old, it can be offset by a few metres from the buildings and the aerial imagery. The owner's name is not shown. Boundary marking (Service Public, in French)

At a glance

Computed area: 1,321 m²from the cadastral plan
Perimeter: 162 mcomputed from the cadastral plan
Addresses: None linked
Clay soils: Medium exposure (100% of the parcel)
Risk prevention plans: Not recorded

This parcel’s figures, from the cadastre, the national address base (BAN), IGN’s BD TOPO and the risk databases. Missing data is not shown.

What this means for a project

Zone AUI: building follows the arrival of services or a planned development; the PLU’s development guidelines describe what is planned. Guide: Start with the zone and its document
8 prescriptions, information areas or easements touch the parcel (details below): they apply on top of the zone’s rules. Guide: Read the documents, not just the colour
Clay soils: Medium exposure (100% of the parcel). General rule in medium or high exposure areas: the seller of unbuilt buildable land supplies a preliminary geotechnical study where planning rules permit individual houses. Exposure alone does not establish that this sale is covered. Construction projects are subject to separate rules to check with the professional. Géorisques: soil studies and construction

Points drawn from this parcel’s data. They tell you which questions to ask; they do not replace a certificat d’urbanisme or the official statement of risks.

Understanding the map information

Planning zoning

AUI – Development zone (AUc)

Area set aside for development: building is allowed as services arrive or as part of a wider scheme, under the PLU rules.

100% of the parcel

Addresses

No address from the Base Adresse Nationale is linked to this parcel.

All addresses in Belloy-en-France

Local plan prescriptions

For guidance only, from the Géoportail de l'Urbanisme extraction of 15 August 2026; the linked document may have been replaced since. Only the planning document's regulations and annexes are binding. A missing item means “not recorded”, not “no constraint”.

National clay exposure (BRGM/Géorisques) and labels in the local planning document are separate sources: dates, methods and purposes may differ. Both values are retained; neither replaces the other. Check the national map and local rules with the authorities. Data versions: national clay layer 2026-07-02; GPU extraction 2026-08-15. Géorisques: soil studies and construction

Building restricted (environment, risks, public interest): Aléa retrait-gonflement des sols argileux : Faible – 100% of the parcel
Building restricted (environment, risks, public interest): Risque : Gypse – 100% of the parcel
Development guidelines (OAP): Orientation d'Aménagement et de programmation : ZAC de l'Orme – 100% of the parcel

See the document on the Géoportail de l'Urbanisme

Local plan information

Joint development zone (ZAC): Zones d'aménagement concerté : ZAC de l'Orme – 100% of the parcel
Urban pre-emption right: Droit de Préemption urbain – 100% of the parcel
Transport noise sector: Classement au bruit - Voie de type C3 (100 m de part et d'autre) – 100% of the parcel
Sanitation and waste: Zonage d'assainissement des eaux usées : assainissement non collectif – 100% of the parcel
Sanitation and waste: Zonage pour la gestion des eaux pluviales et de ruissellement – 100% of the parcel

See the document on the Géoportail de l'Urbanisme

Public-utility easements

Not recorded in the Géoportail de l'Urbanisme

Risks

This information is for guidance only and has no regulatory force: it does not replace the risk statement (état des risques, ERRIAL) to be attached to a sale or a rental, which anyone can produce free of charge on Géorisques.

Some clay soils swell when wet and shrink as they dry, which can crack buildings. The higher the exposure, the more building precautions are needed. A risk prevention plan (PPR) maps the areas exposed to a hazard (flooding, ground movement, an industrial site…) and sets building rules there. The Géoportail de l'Urbanisme does not list every plan yet.

Clay shrink-swell: Medium exposure (100% of the parcel)
Risk prevention plan: Not recorded in the Géoportail de l'Urbanisme
Seismic zone: Zone 1 (very low)
Radon potential: Category 1 (low)

Produce the risk statement (ERRIAL) on Géorisques Risks near an address (Géorisques)

The parcel in its section

By recorded area, larger than 50% of the 409 parcels of section A whose area is recorded.
Median recorded area in the section: 1,310 m².
89 of the section’s 409 parcels have a linked building, 109 an address.
Belloy-en-France has 2,088 parcels; this one holds 0.01% of their total recorded area.

Details

Cadastral reference: 95056 000 A 606 (950560000A0606)
Commune: Belloy-en-France (95056)
Prefix: 000
Section: A
Number: 606
Recorded area (contenance): 1,322 m²
Computed area: 1,321 m² Computed from the plan, may differ from the recorded area.

Planning in this commune

Planning document: Local zoning plan (PLU) (9505620180201)

Find the applicable document on the official GPU map

Document identified in the data, without assurance that it covers the whole commune or every parcel. Several documents may apply. Check coverage and the current version with the town hall or GPU. For guidance only, from the Géoportail de l'Urbanisme extraction of 15 August 2026; the linked document may have been replaced since. Only the planning document's regulations and annexes are binding. A missing item means “not recorded”, not “no constraint”.

Planning zones (share of parcel area):

Agricultural zone (A) (83%)
Urban zone (U) (9%)
Natural and forest zone (N) (7%)
Development zone (AUc) (1%)
Closed development zone (AUs) (0%)

Source datasets used on this page: 6. Their dates and reuse terms can differ.

Sources and versions used on this page

Plan cadastral informatisé (Etalab) 2026-06-01 — Licence Ouverte / Open Licence 2.0
Cadastre Etalab redistributes the French digital cadastral plan in simplified geographic formats, including parcels, sections and buildings. Mapped boundaries do not replace a boundary survey.
Géoportail de l’Urbanisme — extraction nationale 2026-08-15 — Licence Ouverte / Open Licence 2.0
The national Urban Planning Geoportal extraction brings together layers published by the GPU from documents supplied by municipalities, intermunicipal authorities and state services. The competent authorities remain responsible for the documents and their regulatory meaning.
Base Adresse Nationale (listes d’adresses et géocodage Géoplateforme) 2026-10-07 — Licence Ouverte / Open Licence 2.0
The Base Adresse Nationale brings together French addresses, including those published by municipalities. Address coordinates alone do not establish an administrative link to a cadastral parcel.
Exposition au retrait-gonflement des argiles 2026-07-02 — Licence Ouverte / Open Licence 2.0
The clay shrink-swell exposure map describes geological exposure at the map’s scale. It does not replace a site-specific geotechnical investigation.
Zonage sismique de la France (décret n° 2010-1255), liste version janvier 2015 2018-07-30 — Licence Ouverte / Open Licence 1.0
This vector layer published by wpd is based on the BRGM / planseisme.fr list of municipalities and seismic zones, January 2015 version. Municipal zoning does not measure the structural risk of an individual building.
Potentiel radon des communes (arrêté du 27 juin 2018) 2019-05-06 — Licence Ouverte / Open Licence 1.0
Radon potential zoning classifies municipalities according to their geological potential to emit radon. It does not measure the indoor radon concentration of an individual building.