CarteparcelleMapFrançais

42 Route des Artisans, 24590 Saint-Geniès

Parcel of 1,998 m² (recorded area) with an industrial building. Planning document zoning: urban zone (Ux2).

Recorded area
1,998 m²
Planning zone
Ux2Urban zone (U)

Address from France’s national address register (BAN), associated with this parcel for information only. Addresses and how they are linked

24412 000 ZX 3124412 000 ZX 6424412 000 ZX 7524412 000 ZX 7624412 000 ZX 7724412 000 ZX 7924412 000 ZX 8024412 000 ZX 8724412 000 ZX 11324412 000 ZX 11424412 000 ZX 11524412 000 ZX 11624412 000 ZX 11724412 000 ZX 11824412 000 ZX 12724412 000 ZX 12924412 000 ZX 13024412 000 ZX 13124412 000 ZX 13224412 000 ZX 13824412 000 ZX 14624412 000 ZX 15024412 000 ZX 15824412 000 ZX 15924412 000 ZX 16024412 000 ZX 163
The parcel (in colour) and its neighbours, from the cadastre; computed perimeter: 181 m. North is up; the bar gives the scale.
The cadastre is a tax record: it does not prove ownership. Why?

The cadastre is a tax record: it does not prove ownership and its boundaries have no legal force (only a surveyor's boundary marking does). Its plan is approximate: especially where it is old, it can be offset by a few metres from the buildings and the aerial imagery. The owner's name is not shown. Boundary marking (Service Public, in French)

At a glance

Computed area
2,008 m²from the cadastral plan
Perimeter
181 mcomputed from the cadastral plan
Buildings
1 buildingIndustrial
Height to the eaves
5.1 m
Addresses
1 linked address
Clay soils
Not recorded
Risk prevention plans
Not recorded

This parcel’s figures, from the cadastre, the national address base (BAN), IGN’s BD TOPO and the risk databases. Missing data is not shown.

What this means for a project

Points drawn from this parcel’s data. They tell you which questions to ask; they do not replace a certificat d’urbanisme or the official statement of risks.

Understanding the map information

Planning zoning

Ux2 – Urban zone (U)

Urban zone family. This category does not establish permission to build: check the local code, applicable rules and parcel constraints.

100% of the parcel
Document: 200040830_PLUi_20260120

Addresses

Source: Base Adresse Nationale (national address register). “Linked by its position”: the address point lies inside the parcel. “Linked by its building (RNB)”: the building that carries the address in the national building register (Référentiel National des Bâtiments) stands on the parcel. “Linked by IGN (BAN PLUS)”: IGN matches the address to this parcel, the nearest one on the same side of the street, and the address point lies inside it. In these cases the Base Adresse Nationale declares no link.

All addresses in Saint-Geniès

Local plan prescriptions

For guidance only, from the Géoportail de l'Urbanisme extraction of 15 August 2026; the linked document may have been replaced since. Only the planning document's regulations and annexes are binding. A missing item means “not recorded”, not “no constraint”.

Not recorded in the Géoportail de l'Urbanisme

Local plan information

For guidance only, from the Géoportail de l'Urbanisme extraction of 15 August 2026; the linked document may have been replaced since. Only the planning document's regulations and annexes are binding. A missing item means “not recorded”, not “no constraint”.

Not recorded in the Géoportail de l'Urbanisme

Public-utility easements

For guidance only, from the Géoportail de l'Urbanisme extraction of 15 August 2026; the linked document may have been replaced since. Only the planning document's regulations and annexes are binding. A missing item means “not recorded”, not “no constraint”.

Not recorded in the Géoportail de l'Urbanisme

Buildings

Indicative data (IGN BD TOPO): buildings IGN links to the parcel (BAN PLUS) when they cover at least 20 m² of it, with information from the tax files (DGFiP), anonymised. An unknown height or number is not shown. Construction years are grouped into periods, because old buildings often carry an estimated round year (1800, 1900…). A building standing on several parcels is counted on each, with all its dwellings. Recent buildings may be missing: the tax files are updated with a delay.

On the parcel
1 building
Use
Industrial
Height to the eaves
5.1 m

Risks

This information is for guidance only and has no regulatory force: it does not replace the risk statement (état des risques, ERRIAL) to be attached to a sale or a rental, which anyone can produce free of charge on Géorisques.

Some clay soils swell when wet and shrink as they dry, which can crack buildings. The higher the exposure, the more building precautions are needed. A risk prevention plan (PPR) maps the areas exposed to a hazard (flooding, ground movement, an industrial site…) and sets building rules there. The Géoportail de l'Urbanisme does not list every plan yet.

Clay shrink-swell
Not recorded
Risk prevention plan
Not recorded in the Géoportail de l'Urbanisme
Seismic zone
Zone 1 (very low)
Radon potential
Category 1 (low)

The parcel in its section

Details

Cadastral reference
24412 000 ZX 113 (24412000ZX0113)
Commune
Saint-Geniès (24412)
Prefix
000
Section
ZX
Number
113
Recorded area (contenance)
1,998 m² Contenance arpentée (measured on site).
Computed area
2,008 m² Computed from the plan, may differ from the recorded area.

Planning in this commune

No planning document published on the Géoportail de l'Urbanisme.

Find the applicable document on the official GPU map

Planning zones (share of parcel area):

Source datasets used on this page: 8. Their dates and reuse terms can differ.

Sources and versions used on this page

Neighbouring parcels

Previous parcel: 24412 000 ZX 110Next parcel: 24412 000 ZX 114 – 101 Route des Artisans, 24590 Saint-Geniès