CarteparcelleMapFrançais

2 Impasse de la Fontaine, 05500 La Fare-en-Champsaur

Parcel of 1,750 m² (recorded area) with 3 buildings (residential), built 1900 or earlier. Planning document zones: Ub and Aa.

Recorded area
1,750 m²
Planning zone
Ub (83%) · Aa (17%)Straddles 2 planning document zones.

Address from France’s national address register (BAN), associated with this parcel for information only. Addresses and how they are linked

05054 000 B 76005054 000 B 76205054 000 B 76305054 000 B 76405054 000 B 76505054 000 B 76605054 000 B 76705054 000 B 77005054 000 B 77105054 000 B 77505054 000 B 77605054 000 B 77705054 000 B 78005054 000 B 79205054 000 B 79605054 000 B 79705054 000 B 80005054 000 B 80105054 000 B 80905054 000 B 81205054 000 B 81305054 000 B 81405054 000 B 81505054 000 B 81605054 000 B 81705054 000 B 81805054 000 B 81905054 000 B 83105054 000 B 83205054 000 B 83405054 000 B 83505054 000 B 91405054 000 B 91505054 000 B 91605054 000 B 113405054 000 B 117005054 000 B 118105054 000 B 118205054 000 B 118305054 000 B 118505054 000 B 123205054 000 B 123305054 000 B 123405054 000 B 123505054 000 B 123605054 000 B 123705054 000 B 1323
The parcel (in colour) and its neighbours, from the cadastre; computed perimeter: 175 m. North is up; the bar gives the scale.
The cadastre is a tax record: it does not prove ownership. Why?

The cadastre is a tax record: it does not prove ownership and its boundaries have no legal force (only a surveyor's boundary marking does). Its plan is approximate: especially where it is old, it can be offset by a few metres from the buildings and the aerial imagery. The owner's name is not shown. Boundary marking (Service Public, in French)

At a glance

Computed area
1,748 m²from the cadastral plan
Perimeter
175 mcomputed from the cadastral plan
Buildings
3 buildingsResidential
Built
1900 or earlier
Height to the eaves
up to 9.1 m
Storeys
up to 2 (ground floor included)
Dwellings
1
Addresses
1 linked address
Risk prevention plans
Not recorded

This parcel’s figures, from the cadastre, the national address base (BAN), IGN’s BD TOPO and the risk databases. Missing data is not shown.

What this means for a project

Points drawn from this parcel’s data. They tell you which questions to ask; they do not replace a certificat d’urbanisme or the official statement of risks.

Understanding the map information

Planning zoning

Ub – Urban zone (U)

Urban zone family. This category does not establish permission to build: check the local code, applicable rules and parcel constraints.

83% of the parcel
Document: 05054_PLU_20190403

Aa – Agricultural zone (A)

Protected farmland: building is strictly limited.

17% of the parcel
Document: 05054_PLU_20190403

Addresses

Source: Base Adresse Nationale (national address register). “Linked by its position”: the address point lies inside the parcel. “Linked by its building (RNB)”: the building that carries the address in the national building register (Référentiel National des Bâtiments) stands on the parcel. “Linked by IGN (BAN PLUS)”: IGN matches the address to this parcel, the nearest one on the same side of the street, and the address point lies inside it. In these cases the Base Adresse Nationale declares no link.

All addresses in La Fare-en-Champsaur

Local plan prescriptions

For guidance only, from the Géoportail de l'Urbanisme extraction of 15 August 2026; the linked document may have been replaced since. Only the planning document's regulations and annexes are binding. A missing item means “not recorded”, not “no constraint”.

National clay exposure (BRGM/Géorisques) and labels in the local planning document are separate sources: dates, methods and purposes may differ. Both values are retained; neither replaces the other. Check the national map and local rules with the authorities. Data versions: national clay layer 2026-07-02; GPU extraction 2026-08-15. Géorisques: soil studies and construction

Protected heritage woodland
Bocage – 100% of the parcel

See the document on the Géoportail de l'Urbanisme

Local plan information

For guidance only, from the Géoportail de l'Urbanisme extraction of 15 August 2026; the linked document may have been replaced since. Only the planning document's regulations and annexes are binding. A missing item means “not recorded”, not “no constraint”.

Not recorded in the Géoportail de l'Urbanisme

Public-utility easements

For guidance only, from the Géoportail de l'Urbanisme extraction of 15 August 2026; the linked document may have been replaced since. Only the planning document's regulations and annexes are binding. A missing item means “not recorded”, not “no constraint”.

Not recorded in the Géoportail de l'Urbanisme

Buildings

Indicative data (IGN BD TOPO): buildings IGN links to the parcel (BAN PLUS) when they cover at least 20 m² of it, with information from the tax files (DGFiP), anonymised. An unknown height or number is not shown. Construction years are grouped into periods, because old buildings often carry an estimated round year (1800, 1900…). A building standing on several parcels is counted on each, with all its dwellings. Recent buildings may be missing: the tax files are updated with a delay.

On the parcel
3 buildings
Use
Residential
Height to the eaves
up to 9.1 m
Storeys
up to 2 (ground floor included)
Dwellings
1
Built
1900 or earlier

Risks

This information is for guidance only and has no regulatory force: it does not replace the risk statement (état des risques, ERRIAL) to be attached to a sale or a rental, which anyone can produce free of charge on Géorisques.

Some clay soils swell when wet and shrink as they dry, which can crack buildings. The higher the exposure, the more building precautions are needed. A risk prevention plan (PPR) maps the areas exposed to a hazard (flooding, ground movement, an industrial site…) and sets building rules there. The Géoportail de l'Urbanisme does not list every plan yet.

Clay shrink-swell
Low exposure (100% of the parcel)
Risk prevention plan
Not recorded in the Géoportail de l'Urbanisme
Seismic zone
Zone 3 (moderate)
Radon potential
Category 1 (low)

National clay exposure (BRGM/Géorisques) and labels in the local planning document are separate sources: dates, methods and purposes may differ. Both values are retained; neither replaces the other. Check the national map and local rules with the authorities. Data versions: national clay layer 2026-07-02; GPU extraction 2026-08-15. Géorisques: soil studies and construction

The parcel in its section

Details

Cadastral reference
05054 000 B 914 (050540000B0914)
Commune
La Fare-en-Champsaur (05054)
Prefix
000
Section
B
Number
914
Recorded area (contenance)
1,750 m²
Computed area
1,748 m² Computed from the plan, may differ from the recorded area.

Planning in this commune

Planning document
Local zoning plan (PLU) (05054_PLU_20190403)

Find the applicable document on the official GPU map

Document identified in the data, without assurance that it covers the whole commune or every parcel. Several documents may apply. Check coverage and the current version with the town hall or GPU. For guidance only, from the Géoportail de l'Urbanisme extraction of 15 August 2026; the linked document may have been replaced since. Only the planning document's regulations and annexes are binding. A missing item means “not recorded”, not “no constraint”.

Planning zones (share of parcel area):

Source datasets used on this page: 8. Their dates and reuse terms can differ.

Sources and versions used on this page

Neighbouring parcels

Previous parcel: 05054 000 B 913Next parcel: 05054 000 B 915 – 7 Route de Notre Dame, 05500 La Fare-en-Champsaur